Samsung Washer ND Error Code: Not Draining Quick Fix
Quick Answer: The ND (Not Draining) error code on a Samsung washing machine is identical to codes 5C and 5E. It indicates that water failed to drain from the drum within the allotted time limit due to a clogged coin filter or a seized drain pump motor (#DC31-00054A).
⚠️ ND vs 5C: Samsung uses 'ND' on North American models and '5C' or '5E' on European/Asian models. The underlying mechanical failure is 100% identical.
#1 Most Common Fix: Samsung OEM Drain Pump Motor
Official OEM Part Number: #DC31-00054A
⏱️ Install Time: 20 Minutes | 💰 Avg Cost: $21.99 – $32.00
Step 1: Free 2-Minute Reset & Test
- Open the small bottom-right service flap on the front of the washer.
- Drain residual water using the black rubber emergency hose.
- Unscrew the white filter trap, clear out hairpins and coins, and test the spin cycle.
Step 2: Symptom & Part Number Lookup Table
| Symptom | Required OEM Part | Difficulty & Cost | Action |
|---|---|---|---|
| Filter is clean, but pump hums and washer stops with ND code Cause: Worn magnetic pump impeller | Samsung Drain Pump Motor#DC31-00054A | Easy DIY (20 min) Est: $23.99 | Check Price on Amazon → |
Frequently Asked Questions
How do I clear the ND code on my Samsung washer?
Clean the debris filter, drain the water, plug the machine back in, and press and hold 'Start/Pause' for 3 seconds or select 'Spin Only'.