GE Washer E22 & E23 Error Code: Inlet Valve (#WH13X26534) & Drain Pump (#WH23X28418)
Quick Answer: On a GE washing machine, error code E22 means a slow water fill timeout (faulty Water Inlet Valve #WH13X26534), while E23 (or E31) indicates a drain timeout caused by a failed Drain Pump Assembly (#WH23X28418).
⚠️ GE Top-Load Drain Pump Location: On GE GTW top-load washers throwing E23, there is NO clean-out filter trap! Coins go straight into the Drain Pump (#WH23X28418) mounted underneath the right rear corner of the tub.
#1 Most Common Fix: GE OEM Washer Drain Pump Assembly
Official OEM Part Number: #WH23X28418
⏱️ Install Time: 20 Minutes | 💰 Avg Cost: $29.99 – $42.00
Step 1: Free 2-Minute Reset & Test
- Unplug the GE washing machine for 3 minutes to clear E22 or E23.
- For E22: Check rear faucet pressure and clean the inlet hose screens.
- For E23: Listen during the drain cycle—if the pump hums or rattles without pumping water out of the standpipe, replace Drain Pump (#WH23X28418).
Step 2: Symptom & Part Number Lookup Table
| Symptom | Required OEM Part | Difficulty & Cost | Action |
|---|---|---|---|
| Water remains in the wash basket and display flashes E23 or E31 Cause: Burned out or jammed Drain Pump Motor | GE Washer Drain Pump Assembly#WH23X28418 | Easy DIY (20 min) Est: $34.50 | Check Price on Amazon → |
| Washer fills slowly or stops with E22 error code Cause: Failed 4-Solenoid Water Inlet Valve | GE Top-Load Water Inlet Valve#WH13X26534 | Easy DIY (15 min) Est: $36.99 | Check Price on Amazon → |
Frequently Asked Questions
Does GE drain pump #WH23X28418 replace #WH23X24178 and #WH23X27574?
Yes! Part #WH23X28418 is the updated factory replacement for WH23X24178 and WH23X27574 across GE GTW and Hotpoint top-load washers.