Whirlpool Oven F3 E0 or F2 E1 Error: Temperature Sensor Part (#WPW10181986)
Quick Answer: The F3 E0 (or F3 / F4) error code on a Whirlpool, Maytag, or KitchenAid oven means the Oven Temperature Sensor Probe (#WPW10181986) is open or shorted. If the oven isn't heating on a gas range without an error code, the Bake Igniter (#W10918546) has worn out.
⚠️ 2-Screw Repair From Inside the Oven: You do NOT need to pull a heavy wall oven out of the cabinet to fix F3 E0! The temperature sensor probe (#WPW10181986) is the thin metal rod in the top-left corner inside the oven cavity—held by just 2 screws from the front!
#1 Most Common Fix: Whirlpool OEM Oven Temperature Sensor Probe
Official OEM Part Number: #WPW10181986
⏱️ Install Time: 10 Minutes (2 screws inside oven cavity) | 💰 Avg Cost: $16.99 – $26.00
Step 1: Free 2-Minute Reset & Test
- Flip the oven circuit breaker OFF at your home electrical panel for 5 full minutes, then turn it back ON.
- If F2 E1 (Stuck Key / Keypad Short) appears, unplug the range, open the rear console cover, and reseat the flat ribbon cable on the control board.
- If F3 E0 returns or the oven burns food wildly, replace the Temperature Sensor Probe (#WPW10181986).
Step 2: Symptom & Part Number Lookup Table
| Symptom | Required OEM Part | Difficulty & Cost | Action |
|---|---|---|---|
| Oven beeps with F3 E0, F3 E1, or bakes at the wrong temperature Cause: Failed platinum RTD Oven Temperature Sensor | Whirlpool Oven Temperature Sensor Probe#WPW10181986 | Very Easy DIY (10 min inside oven) Est: $18.99 | Check Price on Amazon → |
| Gas oven clicks or glows orange underneath, but gas burner never ignites (stays cold) Cause: Weakened Silicon Carbide Bake Igniter drawing under 3.0 Amps | Whirlpool Flat Gas Oven Igniter#W10918546 | Easy DIY (15 min under bottom floor plate) Est: $24.99 | Check Price on Amazon → |
| Electric oven takes 40 minutes to preheat or bottom element has visible blisters/cracks Cause: Burned out Lower Hidden/Visible Bake Element | Whirlpool Electric Oven Bake Element#W10779716 | Easy DIY (15 min) Est: $34.50 | Check Price on Amazon → |
Frequently Asked Questions
What resistance should Whirlpool oven sensor #WPW10181986 read at room temperature?
At 70°F (21°C) room temperature, a healthy #WPW10181986 sensor reads approximately 1,080 to 1,090 Ohms on a multimeter. Any reading dramatically higher or infinite (OL) triggers F3 E0.